preloader

Wireless Industrial EX-Proof Vibration Sensor 6kHz

  • Frequency range up to 6.3kHz.
  • 3-axis accelerometer and temperature sensor.
  • Advanced signal processing on the edge calculating key vibration KPIs such as RMS, PEAK, kurtosis, and crest factor – from acceleration and velocity or root-cause analysis through FFTs.
  • Battery operated sensor – no wiring needed.
  • Operating temperature in hazardous environment -40°C to +60°C.
  • Dimensions: 78.5 x 28mm
  • Weight: 129g
  • Mounting: M8 x 1.25 thread
Materials
  • Cover material: 316ss
  • Top cap material: PA
Environment
  • Operating temperature:
    • -40°C to +60°C (hazardous environment)
    • -40°C to +85°C (non-hazardous environment)
  • Mounting surface temperature:
    • +60°C (hazardous environment)
    • +85°C (non-hazardous environment)
  • Storage temperature: 10°C to 30°C
  • IP rating: IP67
Wireless communication
  • 2.4GHz / Wirepas Mesh
Battery
  • 3.6V lithium thionyl chloride
  • Battery lifetime up to 5 years
  • Battery life is dependent on operating temperature and configuration
Software
  • Fully configurable data delivery
Vibration
  • Triaxial acceleration measurement
  • Dynamic range +/- 2, 4, 8 or 16
  • Frequency range 2-6300Hz (+/-3dB) (Mounting dependent)
  • Sampling rate 26.7kHz
  • Resolution 16bit
Temperature
  • Measurement range -40°C to +85°C (limited by maximum operating temperature)
  • Resolution 0.1°C
  • Accuracy +/- 0.3°C
  • Repeatability +/- 0.1°C
Key performance indicators
  • Velocity: RMS, PEAK, P2P
  • Acceleration: RMS, PEAK, P2P, kurtosis, crest factor
Sample amounts
  • Single axis, max. 110592 samples
  • Triaxial, max. 36864 samples per axis
Signal processing
  • Butterworth high, low and band pass filter
  • Configurable low and high cut-off
  • Decimation configurable, max. ratio 1:9
FFT Calculation
  • Sample amount 4096
  • Lines of resolution 1600
  • Averages, max. 9
  • Overlap, 0 to 100%
  • Hanning windowing
ATEX/IECEx
  • EESF 21 ATEX 014X
  • IECEx EESF 21.0009X
  • II 2 G Ex ib IIC T4 Gb
  • II 2 D Ex ib IIIC T135°C Db
  • -40°C ≤ Ta ≤ +60°C
USA
  • Class I Zone 1 AEx ib IIC T4 Gb
  • Zone 21 AEx ib IIIC T135°C Db
  • Class I, Division 2, Groups A,B,C,D T4
  • Class II, Division 2, Groups F,G T4
  • Class III, Division 2
  • -40°C ≤ Ta ≤ +60°C
North America
  • UL61010-1/CSA C22.2 No. 61010-1
  • UL/CSA 60950-22
  • UL 60079
  • CSA 60079
  • E115489
Canada
  • Ex ib IIC T4 Gb
  • Ex ib IIIC T135°C Db
  • -40°C ≤ Ta ≤ +60°C
  • CE Declaration of Conformity (EU)
  • UKCA Declaration of Conformity (GB)
  • FCC Supplier’s Declaration of Conformity (USA)
  • Anatel (Brasil)
  • RSS-210 (Canada)
  • PTA (Pakistan)
  • CRA (Qatar)
  • CCAF (Taiwan)
  • TRA (UAE)
    … and more

Summary

Special 6 kHz vibration sensor can be used to detect imbalance, misalignment and looseness, bearing wear problems in hazardous environments
Improvements from 6 kHz sensor is mentioned as blue font

  • ManufacturerTreon
  • CategorySensors
  • Available From2021
  • End of LifeActively in use
  • Int. Prop.This patented technology is protected by US Patent 11656239.
  • Rating